Comunicações
The AD6676 allows designers of high-performance communications and instrumentation equipment to reduce the complexity of their receiver designs while simultaneously achieving frequency planning...
Low-power field programmable clock generator offers best-in-class performance and design flexibility.
The low-power programmable clock generators vary in numbers of outputs and output...
NJR's MUSES8832 Rail-to-Rail Output High Quality Audio Dual Operational Amplifier is a Rail-to-Rail output high-quality audio operational amplifier, which is optimized for high-end audio and portable...
The PCI-7841/cPCI-7841 is a Controller Area Network (CAN) interface card. It supports a dual-port CAN's interface that can run independently or bridged at the same time.
The built-in CAN...
Rapid load step response with smallest output capacitors - tight regulation window avoids downstream system restart due to UV protection.
The UCC28730 isolated-flyback power...
ROHM Semiconductor introduces the BD9E151 nonsynchronous step down DC/DC converter.
It features a wide 6 V to 28 V input and is capable of handling 1.2 A of output current through the...
The INA300 is a high common-mode, current-sensing comparator that is configured to detect overcurrent conditions through measuring the voltage developed across a current sensing or shunt...
Low-noise and low-dropout linear post regulators TLS203B0 and TLS205B0 are capable of supplying an output current of 300 and 500 mA.
The ideal choice for battery-powered systems,...
The MPM3684 and MPM3686 are easy-to-use fully integrated 15A and 20A step-down DC/DC power modules operating from 4.5V to 18V input voltage.
They integrate the DC/DC converter, power inductor,...
The AP4340S is an output voltage detector for Primary Side Control System. It is a low power loss solution.
It detects the output voltage and provides a periodical signal when the output...
Texas Instruments UCC24650 200V Wake-Up Monitor is an easy-to-use secondary-side voltage monitor that periodically measures its own VDD voltage.
A relative droop of 3% from the previous reading...
The LTC®7860 high efficiency surge stopper protects loads from high voltage transients. High efficiency permits higher currents and smaller solution sizes.
During an input overvoltage event,...
The ZLPM8010 is a power management and control solution for satellite set-top boxes (STBs).
Based on an efficient boost converter the ZLPM8010 provides the power supply of up to 750mAand all...
The Avago APDS-9960 is a digital RGB, ambient light, proximity and gesture sensor device in a single 8-pin package. The device has an I2C compatible interface providing red, green, blue, clear...
The LTC®3880/LTC3880-1 are dual, PolyPhase DC/DC synchronous step-down switching regulator controllers with an I2C-based PMBus compliant serial interface.
The controllers use a constant...
The LTC®2966 is a low current, high voltage dual channel voltage monitor. Internal high value resistors sense the input monitor pins providing a compact and low power solution for voltage...
The 8308I is a low-skew, 1-to-8 Fanout Buffer. The 8308I has two selectable clock inputs. The CLK, nCLK pair can accept most differential input levels.
The LVCMOS_CLK can...
The Si2144 is the industry's most advanced digital Set-Top Box (STB) tuner supporting all worldwide cable and terrestrial TV standards for digital TV reception.
Like the previous generations of...
The LT3014B is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 20mA of output current with a dropout voltage of 350mV.
Designed for use in...
Toshiba is the first company to offer a chipset that can convert an Ultra HD HDMI video stream to a dual CSI-2 video interface on an application processor for use in 4K capable s mart monitors,...
