Semicondutores

The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting.  The 1.5A current limit along with the ability to program output voltages up to...
The bq2022A is a 1K-bit serial EPROM containing a factory-programmed, unique 48-bit identification number, 8-bit CRC generation, and the 8-bit family code (09h). A 64-bit status register controls...
Silicon Labs Si5380 12-Output JESD204B Clock Generator is a high performance, integer-based (M/N) clock generator optimized for small cell wireless applications.  These demand the highest level...
Cypress PSoC® 5LP Cortex™-M3 programmable system on chip devices offer unmatched high-precision analog and the flexibility to design custom system solutions. Designers can use PSoC 5LP with PSoC...
The LTC®5549 is a general purpose passive doublebalanced mixer that can be used for upconversion or downconversion.  The RF port is designed for the 2GHz to 14GHz band and the IF port is...
The LTC®3886 is a dual PolyPhase DC/DC synchronous step-down switching regulator controller with I2C-based PMBus compliant serial interface.  This controller employs a constant-frequency,...
The TPS61098x is an ultra low power solution for products powered by either a one-cell or two-cell alkaline, NiCd or NiMH, one-cell coin cell or one-cell Li-Ion or Li-polymer battery. It integrates...
Avago has extended the reach of PCIe for use as a fabric for data center and cloud computing through its ExpressFabric initiative and platform of hardware and software.  ExpressFabric can...
The LT®8602 is a quad channel, current mode, monolithic buck switching regulator with a programmable power-on reset.  All regulators are synchronized to a single oscillator with an adjustable...
The TPS22914/15 is a small, low RON, single channel load switch with controlled slew rate. The device contains an N-channel MOSFET that can operate over an input voltage range of 1.05 V to 5.5 V and...
The TPS82085 device is a 3-A step-down converter MicroSiP™ module optimized for small solution size and high efficiency.  The power module integrates a synchronous step-down converter and an...
The ADA4522-2 is a dual, zero-drift, low noise, low power, rail-to-rail output amplifier optimized for total accuracy over time, temperature and voltage conditions.  The wide operating voltage...
Microchip’s MTCH6303 is an innovative turnkey projected capacitive touch controller that provides multi-touch coordinates as well as a readymade multi-finger surface gesture suite. MTCH6303 brings...
The LT®4276 is a pin-for-pin compatible family of IEEE 802.3 and LTPoE++ Powered Device (PD) controllers. It includes an isolated switching regulator controller capable of synchronous operation in...
The LTC®6268-10/LTC6269-10 is a single/dual 4GHz FET-input operational amplifier with extremely low input bias current and low input capacitance.  It also features low input-referred current...
The AD7124-8 is a low power, low noise, completely integrated analog front end for high precision measurement applications.  The device contains a low noise, 24-bit Σ-Δ ADC, and can be...
The AP21410 and AP21510 are integrated high-side power switches optimized for power delivery protection in digital communication ports such as HDMI, USB and other hot-swap applications.  The...
The LP8758 is designed to meet the power management requirements of the latest application processors in mobile phones and similar portable applications.  The device contains four step-down...
Silicon Labs Si114X Proximity/Ambient Light Sensor Modules are low-power, reflectance-based, infrared proximity, UV Index and ambient light modules with integrated single IR LED, two additional LED...
The LTC®2348-18 is an 18-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode range inputs.  Operating from a 5V low...
<< 1 | 2 | 3 | 4 >>