Semicondutores
The LTC®2984 measures a wide variety of temperature sensors and digitally outputs the result, in °C or °F, with 0.1°C accuracy and 0.001°C resolution.
The LTC2984 can measure the temperature...
IDT VersaClock® 5 family of devices is a low-power programmable clock generator with best-in-class performance and design flexibility.
Excellent phase jitter performance over wide...
The AD9154-EBZ, AD9154-M6720-EBZ and the AD9154-FMC-EBZ supports the AD9154 which is a quad, 16-bit, high dynamic range digital-to-analog converter(DAC)
It provides a maximum sample rate of 2.4...
The TPS65720 is a small power management unit targeted for Bluetooth headsets or other portable low power consumer end equipments. It contains an USB friendly Lithium-Ion battery charger, a high...
ZENO™ (MAX79356) is a programmable narrowband orthogonal frequency division multiplexing (OFDM)-based powerline communication (PLC) modem system-on-chip (SoC) device that provides standards compliant...
The LTC®3110 is a 2A bidirectional buck-boost DC/DC regulator with capacitor charger and balancer.
Its wide 0.1V to 5.5V capacitor/battery voltage and 1.8V to 5.25V system backup voltage...
The ISL8117 is a synchronous buck controller to generate POL voltage rails and bias voltage rails for a wide variety of applications in industrial and general purpose segments. Its wide input and...
Offers Balance of High Performance, Wide Temperature Range, and Small Size
The MAX17620 is a high-frequency, high-efficiency synchronous step-down DC-DC converter with integrated MOSFETs that...
The A1454 linear Hall effect sensor IC provides a 12-bit digital output word that is proportional to the strength of the magnetic field that is present. Its quiescent output value is at mid-scale,...
The PAC1921 is a dedicated power-monitoring device with a configurable analog output that can present power, current or voltage.
All information is also provided on the 2-wire/I2C©...
The AP2141A and AP2151A are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications.
The family of devices complies with USB 2.0 and is...
This MOSFET is designed to minimize the on-state resistance (RDS(ON)) and yet maintain superior switching performance, making it ideal for high-efficiency power management...
Microchip Technology Inc.’s MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a digital word with ±0.25°C/±0.5°C (typical/maximum) accuracy.
The MCP9808 comes...
The UCC24630 SR controller is a high-performance controller and driver for N-channel MOSFET power devices used for secondary-side synchronous rectification.
The combination of controller and MOSFET...
Analog Devices ADM1293/ADM1294 Digital Power Monitors are high accuracy, integrated digital power monitors that provide digital current, voltage, and power monitoring using an on-chip, 12-bit...
The LTC®4040 is a complete 3.5V to 5.5V supply rail battery backup system. It contains a high current step-up DC/DC regulator to back up the supply from a single-cell Li-Ion or...
The LTC®2348-18 is an 18-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode range inputs.
Operating from a 5V low...
The ADC34J2x are a high-linearity, ultra-low power, dual-channel, 12-bit, 50-MSPS to 160-MSPS, analog-to-digital converter (ADC) family.
The devices are designed specifically to support...
The DRV2700 device is a single-chip piezo driver with an integrated 105-V boost switch, integrated power diode, and integrated fully-differential amplifier.
This versatile device is capable of...
The Avago ACFL-5211T is an automotive grade dual-channel optocopler device designed for bi-directional digital communications.
The device has two optocoupler channels internally...
