4MHz, Miniature 600mA, Synchronous Step-Down DC-DC Converter with Integrated MOSFETs

Offers Balance of High Performance, Wide Temperature Range, and Small Size

The MAX17620 is a high-frequency, high-efficiency synchronous step-down DC-DC converter with integrated MOSFETs that operates over a 2.7V to 5.5V input voltage range. The device supports up to 600mA load current and 1.5V to 3.4V output voltage. High-frequency operation enables the use of small, low-cost inductors and capacitors.

The device features selectable PWM/skip mode of operation at light loads and operates at a 4MHz fixed-frequency in PWM mode. Skip mode improves system efficiency at light loads, while PWM mode maintains a constant switching frequency over the entire load. In skip mode, the device draws only 40μA of quiescent current from the supply input. In shutdown mode, the current consumption is reduced to 0.1μA.

The device also features a soft-start feature to reduce the inrush current during startup, and also incorporates an enable (EN) pin to turn on/off the device. An open-drain PGOOD pin provides power-good signal to the system upon achieving successful regulation of the output voltage.

The MAX17620 is available in an 8-pin, 2mm x 2mm TDFN package and operates over the -40°C to +125°C temperature range.

  • Minimizes External Components, Reducing Total Cost
    • Synchronous Operation for High Efficiency and Reduced Cost
    • Internal Compensation for Stable Operation at Any Output Voltage
    • All-Ceramic Capacitor Solution
    • 4MHz Operation
    • Only 5 External Components Required
    • Total Solution Size is 14.3 mm² (Sum of the Components Area)
  • Reduces Number of DC-DC Regulators to Stock
  • Wide 2.7V to 5.5V Input Voltage Range
  • Adjustable 1.5V to 3.4V Output Voltage Range
  • Delivers Up to 600mA Load Current
  • 100% Duty-Cycle Operation
  • 2% Reference Voltage Accuracy
  • Available in a 2mm x 2mm TDFN Package
  • Peak Efficiency 91%
  • Skip Mode for High Light-Load Efficiency
  • Shutdown Current = 0.1μA
  • Peak Current-Limit Protection
  • Soft-Start Reduces Inrush Current During Startup
  • Built-In Output-Voltage Monitoring (Open-Drain PGOOD Pin)
  • -40°C to +125°C Operation
  • Reduces Power Dissipation
  • Operates Reliably
Applications

  • Battery-Powered Instruments
  • Distributed Power Systems
  • Point-of-Load Power Supply
  • Standard 5V Rail Supplies

Datasheet