AMC FPGA Carrier for FMC, Virtex-7

The AMC515 is an AMC FPGA Carrier with an FMC (VITA 57) interface. The AMC515 is compliant to the AMC.1, AMC.2 and/or AMC.4 specification. 

The unit has an on-board, re-configurable FPGA which interfaces directly to the AMC Ports 4-11, FCLKA, TCLKA, TCLKB, TCLKC, and TCLKD. The FPGA has an interface to a bank of DDR3 memory (64-bit wide). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host. The AMC515 have ports 12-15 and 17-20 routed as LVDS. The module has a single FMC connector per VITA-57. This allows a wide variety of FMC I/O interfaces to be utilized within a system platform. The on-board PPC runs at 1.2GHz with 2GB of DDR3, 8Mbytes of boot Flash and up to 32GBytes of user Flash. The PPC has an x1 PCIe interface to the FPGA in addition to it’s local bus. The  PPC has dual GbE routed to ports 0 and 1 of the AMC as well as GbE to the FPGA. The AMC515 has Serial Over LAN per IPMI specification and a hardware RNG (Random Number Generator) for secure session.

VadaTech can modify this product to meet special customer requirements. Contact us to discuss your application.

Benefits

  • The FPGA carrier allows any VITA-57 compliant FMCs to be plugged, providing a wealth of I/O options.
  • Optional QorIQ processor keeps resources free for efficient processing and boot times.
  • Virtex-7 FPGA comes in multiple high-performance levels options for design flexibility.
  • Design utilizes proven VadaTech subcomponents and  engineering techniques
  • Electrical, mechanical, software, and system-level  expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty 
      modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company

SPECIFICATIONS 

Architecture Physical Dimensions Single-width, Full-Height Width: 2.89 in. (73.5 mm) Depth: 7.11 in. (180.6 mm) Type AMC FPGA Carrier Xilinx FGPA Virtex-7 Device XC7V2000T in 1925 Package PLL multiplier/divider with jitter cleaner Single FMC slot Single bank of DDR-III Standards AMC Type AMC.1, AMC.2, and AMC.4 (FPGA programmable) Module Management IPMI IPMI Version 2.0 PCIe Lanes x4 or x8 SRIO Lanes Dual x4 XAUI Lanes Dual port XAUI Aurora Lanes Dual x4 Ethernet GbE Dual 1000-BaseBX from PPC Configuration Power AMC515 Carrier is 40W max without the Mezzanine Environmental Temperature Operating Temperature: 0° to 65° C (Air flow requirement is to be greater than 400 LFM) Storage Temperature: -40° to +90° C Vibration 1G, 5-500Hz each axis Shock 30Gs each axis Relative Humidity 5 to 95 percent, non-condensing Front Panel Interface Connectors Front panel FMC LEDs IPMI Management Control 8 user defined LED Mechanical Hot Swap Ejector Handle Software Support Operating Systems Linux, Windows, Solaris and VxWorks Other MTBF MIL Handbook 217-F > TBD. Certifications Designed to meet FCC, CE and UL certifications where applicable Standards VadaTech is certified to both the ISO9001:2000 and AS9100B:2004 standards Compliance RoHS and NEBS Warranty Two (2) years. Trademarks and Logos The VadaTech logo is a registered trademark of VadaTech, Inc. Other registered trademarks are the property of their respective owners. AdvancedMCTM and the AdvancedTCATM logo are trademarks of the PCI Industrial Computers Manufacturers Group. All rights reserved. Specification subject to change without notice.

Datasheet

 
 
09 de marco de 2015