EZ-BLE™ PRoC™ Module - A 10x10x1.8 mm, Fully Certified, Production Ready BLE Module

The Cypress CYBLE-022001-00 is a pre-certified and pre-qualified module for supporting Bluetooth® Low Energy (BLE) wireless communication.

The CYBLE-022001-00 is a turnkey solution and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PRoC™ BLE.

In addition, the CYBLE-022001-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture.

The CYBLE-022001-00 module includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 16 GPIOs in a small - 10×10×1.80 mm package. 

It is a complete solution and an ideal fit for applications requiring BLE wireless connectivity

Bluetooth Qualification:

Cypress’s EZ-BLE PRoC module has passed Bluetooth SIG qualification and is now listed on the Bluetooth SIG website.

RF Regulatory Certification:

EZ-BLE PROC module complies with the FCC (USA), IC (Canada), MIC (Japan), CE (Europe) and KC (Korea) regulations. Please check the datasheet for details.

  • Small 10X10X1.8 mm footprint
  • Pre-certified to enable faster design cycles
    • Bluetooth® 4.1 qualified with QDID
    • Compliant with international RF regulations:
    • FCC (USA), IC (Canada), MIC (Japan), CE (Europe) and KC (Korea)
  • PSoC® CreatorTM Integrated Development Environment
  • 48-MHz ARM® Cortex®-M0 microcontroller
  • 32-bit processor (0.9 DMIPS/MHz)
  • 128-KB flash and 16-KB SRAM
  • Integrated balun, -91-dBm Rx sensitivity, up to +3-dBm Tx power
  • Touch-based buttons/sliders/touchpads
  • SmartSense™ Auto-Tuning
  • 2 x serial communication blocks configurable as UART, I2C or SPI
  • I2S for audio
  • 16 GPIOs
  • 1 x 12-bit, 1 Msps SAR ADC
  • 4 x Timer/Counter/PWMs
  • Bluetooth 4.1 compliant Bluetooth® Low Energy (BLE) radio
  • CapSense™ touch controller
  • Multiple interface options
  • Additional on-board resources
  • 24 MHz and 32.768 KHz crystals on-board
  • 2.4-2.5 GHz chip antenna and other passive components on-board
  • SMT-ready with 21 pads
  • Wide operating voltage (1.9 to 5.5 V)
  • Industrial temperature range (-40°C to +85°C)

The module supports any application that needs simple bluetooth smart-based wireless connectivity.

PSoC Creator™ provides an easy-to-use integrated design environment (IDE) to configure, develop, program, and test a BLE application.

Datasheet

 
Fonte - Cypress