Miniature signal generator outputs 25 to 6000 MHz in 1KHz steps
AtlanTecRF's ASG series of Miniature Signal Generators cover a frequency range of 25 to 6000 MHz, tuneable in 1 kHz steps, with a very good spectral purity
Phase noise at an output frequency of 1 GHz is better than -106 dBc/Hz at an offset of 100 kHz from the carrier. Spurious emissions are typically lower than -70 dBc and harmonics less than -25 dBc.
The clean output signal combined with power levels to +13 dBm, controllable on 0.1 dB steps, make the ASG series of Miniature Signal Generators suitable for use in most RF theatres of application including test and measurement, communications systems and covert interception and countermeasures.
The ASG digital interface provides control options which include direct USB with convenient and clearly functional GUI plus input power derivation; and each unit also has the capability of being driven by RS232. Additionally, for both the 6 GHz version of the ASG Miniature Signal Generator and its 3 GHz sibling there is an option of Ethernet control thereby allowing totally remote and unattended operation in the field and picking up all the logistics and cost advantages.
Frequency stability is determined by an internal TCXO with +/-1 ppm maximum variation over the -20 to +50C operating temperature range but the Miniature Signal Generator can also be connected to an external reference of between 10 and 50 MHz where system stability tracking is required. With all this RF performance, digital connectivity and operational versatility the ASG design comes in a package just 21 x 72 x 100 mm and weighs less than 300 grams.
- 25 - 6000MHz
- Full Range Tuning
- Frequency & Level Control
- USB or Ethernet Control with GUI
- Also with RS232
- External or Internal (+/-1ppm) Reference
- Non-Volatile Memory
- RoHS Compliant
Supplied with:
- Control Software
- USB to Mini USB Cable
- DC Input Connector
RF Performance | ||||
---|---|---|---|---|
Frequency Range | 25 - 3000MHz – USB Control Interface - Model ASG-3000-U 25 - 6000MHz – USB Control Interface - Model ASG-6000-U 25 - 3000MHz – Ethernet Control Interface - Model ASG-3000-E 25 - 6000MHz – Ethernet Control Interface - Model ASG-6000-E |
|||
Frequency Step Size | 1Hz | |||
Output Maximum Amplitude | +13dBm, <3GHz; +10dBM, 3-6GHz | |||
Output Range | +13dBm to -27dBm, 0.1dB Steps (output level set in dBm) | |||
Internal Reference | 40MHz, +/-1ppm over temperature, +/-1ppm per year | |||
Phase Noise Maximum | Frequency 25 - 250MHz 250 - 1000MHz 1000 - 3000MHz 3000 - 6000MHz |
1KHz Offset -98 -92 -83 -80 |
10KHz Offset -106 -96 -94 -85 |
100KHz Offset -112 -106 -101 -92 |
Spurious | Maximum: < -50dBc, Typical: < -70dBc | |||
Harmonics | Typical: -25dBc, Maximum: -20dBc | |||
Lock Time | Standby mode On (synthesiser on, max attenuation, amplifiers off): <10mS Standby mode Off (synthesiser off): <50mS |
|||
RF Output connector | SMA Female | |||
Reference Connector | SMA Female Software controlled input/output 40MHz Output 10-50MHz input (software programmable frequency) |
Power | ||||
---|---|---|---|---|
Power Input | 3.5mm OD x 1.35mm ID coaxial power jack 6-30VDC In, Target: <250mA at 9V, Maximum: 300mA at 9V Centre Positive |
|||
Power Selection | Automatic Switching • Coaxial Power jack selected by default • Allows USB interface connection to unpowered hub with coaxial power input • USB power used when coaxial power not present |
Interface | ||||
---|---|---|---|---|
Control Electrical Interface | USB • Virtual COM port RS232 • 9-pin male D-sub connector • 9.6 (default), 19.2, 38.4, 57.6, 115.2 kbps, software selectable |
|||
Control Interface Selection | Automatic Switching USB interface selected when connected (senses 5V power) RS232 interface selected when USB not connected |
|||
Output Modes | Continuous On/Off via external trigger |
|||
External Trigger | Pin 4 of RS232 connector USB interface selected: • 0-3.3V logic levels RS232 interface selected: • RS232 +/- levels, can be controlled through software DTR control |
|||
Status Indicators | Power Synthesiser Lock RF Output Reference Out |
|||
Control Data Interface | ASCII text | |||
PC User Interfaces | Third-part terminal application (e.g. HyperTerm) • ASCII commands PC application (windows XP, Win 7) • Adjust frequency and output level • Set power-on defaults • Sweep • Control multiple units • Identify connected units |
|||
Internal Memory | Non-volatile, automatically stores most recent settings |
Environmental | ||||
---|---|---|---|---|
Operating Temperature | -20 to +50C | |||
Storage Temperature | -40 to +85C |
Mechanical | ||||
---|---|---|---|---|
Dimensions | 21mm x 72mm x 100mm | |||
Weight | <300g | |||
Material | Aluminium extrusion Aluminium endplates with black legend Rubber Feet |